Lightbar Vision 502 ECE R65

The special thing about our VISION LED light warning bar is not only its compact and aerodynamic design, but above all the low height of 3.6 cm and the depth of 29.9 cm.
Equipped with the latest LED technology, the LED light bar has a very low power consumption. The LED modules with a very fast flash sequence are positioned in such a way that a light emission of 360 degrees is possible. The LED modules have a long and maintenance-free service life and a multi-voltage of 10-30V DC. The modern technology is protected from below by an aluminum-reinforced base and from above by an unbreakable and impact-resistant polycarbonate. The LED light warning bar can be mounted quickly and safely on the vehicle roof. The required material is included in the delivery of the LED light warning bar, nothing else is required here.

Rear warning system
Our VISION LED light warning bar has two hazard warning lights, which are directed forwards and backwards and can be activated separately. The hazard warning lights have two different flashing patterns and can be switched on and off separately.
You can also use the switch to switch to pointing to the right, to the left and to the center.

Headlights
The headlights are on the side. The so-called Alley Lights provide lateral illumination of the work area.

Control module
With the operating module you can also easily switch between different flash patterns.
An LED indicator on the display shows you everything. You have two different mounting options, which are included.

Approval:
I ECE R65
I ECE R10
I Category TA1/TB1
I 1,2,3,4x flash, both sides or alternating

Specifications:
I LxWxH: 60 cm - 180 cm x 29.9 cm x 9.5 cm (with bracket)
I Number of LEDs: 72-192 LEDs ( 5730SMDs )
I Power: 140W, 170W, 170W, 190W, 210W
I Operating voltage: 10-30V DC
Protection class: IP65
I Working temperature: -30°C - +50°C
I Visibility: Up to 6000 m

Scope of delivery:
I roof system
I screw fastening
I Clamp Mount (No Drilling Required)
I Operating module