Lightbar Vision 502 ECE R65 Amber

(7 Reviews)

SKU: 165

Available immediately

from 199,00 €

Show gross prices

excl. 19% VAT , plus

Farbe: Orange

DualColor+ 15,00 €

PDF offer

This item has variations. Please select the requested variation.

The special thing about our VISION LED light warning bar is not only its compact and aerodynamic design, but above all the low height of 3.6 cm and the depth of 29.9 cm.

Equipped with the latest LED technology, the LED light warning bar has a very low power consumption. The LED modules with a very fast flash sequence are positioned so that a light emission of 360 degrees is possible. The LED modules have a long and maintenance-free service life and a multi-voltage of 10-30V DC.

The modern technology is protected from below by an aluminum-reinforced base and from above by an unbreakable and impact-resistant polycarbonate. The LED light warning bar can be installed quickly and safely on the vehicle roof. The required material is included in the delivery of the LED light warning bar.

Permit:
I ECE R65
I ECE R10
I category TA1 / TB1
I 1,2,3,4-fold flash, both sides or alternating

Technical specifications:
I LxWxH: 60cm x 29.9cm x 9.5cm (with bracket)
I Number of LEDs: 72 LEDs (5730SMDs)
I Operating voltage: 10-30V DC
I Degree of protection: IP65
I Working temperature: -30 ° C - + 50 ° C
I Visibility: Up to 6000m

Scope of delivery:
I roof system
I screw fastening
I car plug

Please read the instructions carefully and adhere to the regulations and guidelines listed before operating the device.

WARNING Risk of Injury!

The optical radiation from LED products can damage your eyes.
Never look directly into the light of LED products.

General Safety Instructions - Installation

Installation, commissioning, and maintenance should only be performed by qualified electricians.
Never work on the device while it is live. Risk of fatal electric shock!
Never exceed the permissible voltage specified in this manual.
Do not remove the housing to avoid the risk of electric shock.
LED products must be installed in compliance with the electrical and mechanical safety regulations applicable in your country.
Ensure that the connection cables are laid without kinks, pinches, or sharp edges during installation.
If drilling holes into the structure of the vehicle is necessary for permanent installation, ensure that the vehicle surface is not damaged (e.g., by corrosion). Be cautious not to damage cables or load-bearing components while drilling.

General Safety Instructions - Usage

Avoid extreme temperatures or strong vibrations.
LED products may only be used within the temperature ranges specified in the manual.
Ensure LED products are only operated in accordance with their protection class (IP rating) and are not exposed to prolonged moisture or heavy rain if it falls outside the specified protection class.
Any mechanical stress or load on LED products is prohibited.
LED products must not be used in environments where the presence of flammable gases, vapors, or dust is possible.
Disconnect the LED product from the power supply when not in use or during cleaning (e.g., unplug the connector, trip the fuse, etc.).

Safety Instructions for Magnetic Mounts

Magnetic mounts generate strong forces that can cause injuries if mishandled. Be especially careful to avoid pinching fingers or hands.
Keep magnets away from sensitive devices and objects, such as electronic devices (e.g., smartphones, laptops), magnetic storage media (e.g., credit cards, hard drives), and watches. Such items can be damaged or rendered unusable by magnetic fields.
Store magnets safely when not in use and away from sensitive materials to prevent accidental damage. Preferably keep them in their original packaging.

Special Instructions for Individuals with Medical Implants

Warning: Individuals with pacemakers, implanted defibrillators, or other medical implants must avoid close proximity to strong magnetic fields.

Magnets can significantly disrupt or deactivate such devices, leading to life-threatening situations.
Users with medical implants are strictly prohibited from handling products or accessories with magnetic mounts to ensure their safety.
Maintain a safe distance from magnetic fields, even if the magnets are packaged or not actively in use.

Target Audience

The use and operation of the LED product are permitted only by trained and instructed personnel.
Children must be kept away from LED products. Children and individuals with limited physical, sensory, or cognitive abilities, or lack of experience and knowledge, may only use LED products under supervision.

Cleaning and Maintenance

Perform a thorough visual inspection of the device for cracks, discoloration, damage, contamination, and the condition of seals before each use and at regular intervals. Ensure that glass and seals are properly positioned and fully tightened to prevent water ingress.
Regularly check that all screws and fittings are tightened, especially after vibrations or shocks, to ensure secure mounting.
Improper cleaning of the LED product can cause damage. Do not use aggressive cleaning agents, brushes with metal or hard bristles, or sharp or metallic cleaning tools. During vehicle washes, avoid applying high pressure directly to the installed LED products.

Driving with Mounted Products (Permanently Installed or Magnetic Mounts)

Aerodynamic Effects

The installation of additional products, regardless of the mounting type, affects the vehicle's aerodynamics. This can increase air resistance and impact driving stability, especially at higher speeds.
Adjust your speed according to the changed driving conditions and wind load to ensure safe driving behavior.

Adaptation to Weather Conditions

In adverse weather conditions such as strong winds, rain, snow, or ice, reduce your speed to prevent the mounted products from lifting or detaching.
Note that wind and pressure on the products during rain or snowfall may be stronger and can impact adhesion or stability. Regularly check the mounting.

Secure Hold with Magnetic Mounts

Magnetic mounts can be affected by vibrations, strong wind loads, or uneven roads. Check the secure fit of the magnetic mount before starting your journey and regularly during long trips.
Ensure that the mounting surface is clean and free of grease to ensure optimal adhesion. Loose or inadequately secured products pose a safety risk.

Note on DEKRA-Certified Products

The respective products have been tested by DEKRA under optimal conditions at speeds of up to 220 km/h. These test values apply only under ideal conditions such as dry roads, stable mounting surfaces, and calm wind conditions. Under adverse weather conditions, uneven roads, or other challenging circumstances, these values cannot be guaranteed. Therefore, regular inspection of the mounting is essential to ensure safety.

Speed Limit and Load

The maximum permissible speed according to the manufacturer's specifications must not be exceeded. Exceeding these limits can not only damage the product but also compromise road safety.
During highway driving, regular inspection of the mounting is essential, as the resulting wind and vibrations increase significantly with speed.

Safety Instructions and Warnings for Products with Integrated Batteries

Storage and Handling

Do not store the product in wet, damp, or dusty places.
Avoid placing heavy objects on the product to prevent damage.
Do not expose the product to excessive heat or store it near flammable materials.

Charging the Product

The product should only be charged using original accessories.
Ensure no foreign objects enter the connections (charging port and power plug). Foreign objects can cause fire or electric shock.

Integrated Battery

The integrated battery must not be removed or replaced independently for safety reasons.

Maintenance and Inspection

Fully charge the battery before first use and ensure the product functions properly.
Charge the battery at least every 6 months to ensure optimal performance.
Inspect the product regularly, especially with prolonged use.

Battery Storage

Batteries should only be stored within a temperature range of -20 °C to +40 °C to ensure their safety and performance.
Do not store products with batteries in vehicles, as extreme heat above +40 °C can occur in the interior during high outdoor temperatures, causing damage or hazards such as overheating or fire.
Keep the product in a cool, dry, and well-ventilated place away from direct sunlight.

Disposal

The integrated battery must not be improperly disposed of. Observe the applicable regulations for the disposal of batteries and electronic devices in your region.
Burning, disassembling, or independently removing the battery is prohibited and can cause damage or hazards.

Note: The batteries built into this product are not classified as hazardous materials when used as intended.

Raptors LED Technik®
Ruth Schwob Str. 14
D-74924 Neckarbischofsheim

Tel.: +49 (0)7263 4087078
Mail.: info@raptors-led-technik.de

Average item rating

All reviews:

Most helpful item review

1 from 1 person found this helpful.

Klasse Balken
Wir hatten zuvor den X1 Balken, dieser war sehr preiswert, jedoch qualitativ nicht vergleichbar mit diesem Produkt. Der Vision 502 ist viel hochwertiger verbaut und extrem hell. Wir sind nun auf dieses Modell umgestiegen und wirklich sehr zufrieden. Wir empfehlen hier jedoch direkt Magnethalterung mit zu bestellen.

sd d , 04.02.2023

Total entries: 6

Sehr zufrieden
Der Balken ist qualitativ wirklich sehr hochwertig und die LEDs sind sehr hell. Der Balken kam mit DHL innerhalb nach 3 Werktagen. Der Balken kam gut verpackt bei uns an.
Die Anleitung gibt es als PDF im Onlineshop direkt zum herunterladen. Bei Rückfragen war der Service am Telefon wirklich sehr freundlich und hilfsbereit.

Anonym , 31.10.2023

Tolles Produkt
Ich habe den Signalbalken Mini gekauft und bin total begeistert. Der Signalbalken hat ein kompaktes Design und eine geringe Bauhöhe von 3,6cm. Die Lieferung des Balkens war sehr schnell mit DHL. Die Verarbeitung ist wie von Raptors gewohnt sehr hochwertig. Den Signalbalken kann man ganz einfach montieren, das benötigte Material ist bei der Lieferung des LED-Lichtwarnbalkens dabei. Am Tag sowie bei Nacht ist der Signalbalken super zu sehen. Die Beratung hat im Vorfeld per Telefon stattgefunden was ich sehr hilfreich fand. Dieses Produkt zu diesem Preis mit diesem Top Kundenservice, kann ich nur weiterempfehlen.

Anonym , 10.11.2023

Top Artikel
Super Signalbalken, hochwertige Verarbeitung, super Hell, Kabel lang genug. Mit den dazubestellten Magnethalterungen (Basic) Bombenfest. Klare Empfehlung!

Chris , 21.12.2023

Schöner Mini Signalbalken
Der Artikel war gut verpackt und machte einen guten Eindruck. Der Einbau war wirklich kinderleicht und der Balken ist qualitativ auch sehr hochwertig.
Wir wurden bei Raptors sehr gut beraten und die Lieferung erfolgte innerhalb von drei Werktagen. Ich bin sehr zufrieden mit dem Signalbalken.

Rina L. , 10.09.2024

Top Produkt
Wir haben den Signalbalken Vision Mini bestellt. Der Balken ist qualitativ wirklich sehr hochwertig. Zuvor haben wir uns noch mal direkt beraten lassen. Der Rückruf kam zügig und die Beratung war wirklich sehr zuvorkommend. Wir waren so sehr begeistert vom Balken, dass wir nun bereits ein paar Fahrzeuge mit dem Mini Balken ausgestattet haben.

Collin , 12.09.2024

Klare Kaufempfehlung !
Preis & Leistung = Mega !
Der Signalbalken hat meine Erwartungen mehr als übertroffen! Die Montage war sehr einfach wir haben noch die Magnethalterung dazu bestellt, damit wir flexibel den Signalbalken abmontieren können.

Steven D. Bau , 10.01.2025

Total entries: 6