LED Panel - Slim

(11 Reviews)

SKU: 175

Available immediately

33,61 €

excl. 19% VAT , plus

Text

PDF offer

This item has variations. Please select the requested variation.

Our LED-Panel Slim convinces with bright LEDs and a simple, simple and above all light design.
Easy installation by means of suction cups on the windscreen or in the rear area. Alternatively, the shield can also be mounted on the sun visor using Velcro (not included).

The sign has red, permanently illuminated LEDs and is powered by a car plug (included). On the plug itself, switch the sign on and off.

Specifications:
I lightweight housing
I Attachment by means of suction cups
I High-Power – LEDs
I Operating voltage: 12V DC
I Dimensions: LxWxH 27cm x 10cm x 0,5cm

Scope of delivery:
I Shield
I Car plug incl. cable

Please read the instructions carefully and adhere to the regulations and guidelines listed before operating the device.

WARNING Risk of Injury!

The optical radiation from LED products can damage your eyes.
Never look directly into the light of LED products.

General Safety Instructions - Installation

Installation, commissioning, and maintenance should only be performed by qualified electricians.
Never work on the device while it is live. Risk of fatal electric shock!
Never exceed the permissible voltage specified in this manual.
Do not remove the housing to avoid the risk of electric shock.
LED products must be installed in compliance with the electrical and mechanical safety regulations applicable in your country.
Ensure that the connection cables are laid without kinks, pinches, or sharp edges during installation.
If drilling holes into the structure of the vehicle is necessary for permanent installation, ensure that the vehicle surface is not damaged (e.g., by corrosion). Be cautious not to damage cables or load-bearing components while drilling.

General Safety Instructions - Usage

Avoid extreme temperatures or strong vibrations.
LED products may only be used within the temperature ranges specified in the manual.
Ensure LED products are only operated in accordance with their protection class (IP rating) and are not exposed to prolonged moisture or heavy rain if it falls outside the specified protection class.
Any mechanical stress or load on LED products is prohibited.
LED products must not be used in environments where the presence of flammable gases, vapors, or dust is possible.
Disconnect the LED product from the power supply when not in use or during cleaning (e.g., unplug the connector, trip the fuse, etc.).

Safety Instructions for Magnetic Mounts

Magnetic mounts generate strong forces that can cause injuries if mishandled. Be especially careful to avoid pinching fingers or hands.
Keep magnets away from sensitive devices and objects, such as electronic devices (e.g., smartphones, laptops), magnetic storage media (e.g., credit cards, hard drives), and watches. Such items can be damaged or rendered unusable by magnetic fields.
Store magnets safely when not in use and away from sensitive materials to prevent accidental damage. Preferably keep them in their original packaging.

Special Instructions for Individuals with Medical Implants

Warning: Individuals with pacemakers, implanted defibrillators, or other medical implants must avoid close proximity to strong magnetic fields.

Magnets can significantly disrupt or deactivate such devices, leading to life-threatening situations.
Users with medical implants are strictly prohibited from handling products or accessories with magnetic mounts to ensure their safety.
Maintain a safe distance from magnetic fields, even if the magnets are packaged or not actively in use.

Target Audience

The use and operation of the LED product are permitted only by trained and instructed personnel.
Children must be kept away from LED products. Children and individuals with limited physical, sensory, or cognitive abilities, or lack of experience and knowledge, may only use LED products under supervision.

Cleaning and Maintenance

Perform a thorough visual inspection of the device for cracks, discoloration, damage, contamination, and the condition of seals before each use and at regular intervals. Ensure that glass and seals are properly positioned and fully tightened to prevent water ingress.
Regularly check that all screws and fittings are tightened, especially after vibrations or shocks, to ensure secure mounting.
Improper cleaning of the LED product can cause damage. Do not use aggressive cleaning agents, brushes with metal or hard bristles, or sharp or metallic cleaning tools. During vehicle washes, avoid applying high pressure directly to the installed LED products.

Driving with Mounted Products (Permanently Installed or Magnetic Mounts)

Aerodynamic Effects

The installation of additional products, regardless of the mounting type, affects the vehicle's aerodynamics. This can increase air resistance and impact driving stability, especially at higher speeds.
Adjust your speed according to the changed driving conditions and wind load to ensure safe driving behavior.

Adaptation to Weather Conditions

In adverse weather conditions such as strong winds, rain, snow, or ice, reduce your speed to prevent the mounted products from lifting or detaching.
Note that wind and pressure on the products during rain or snowfall may be stronger and can impact adhesion or stability. Regularly check the mounting.

Secure Hold with Magnetic Mounts

Magnetic mounts can be affected by vibrations, strong wind loads, or uneven roads. Check the secure fit of the magnetic mount before starting your journey and regularly during long trips.
Ensure that the mounting surface is clean and free of grease to ensure optimal adhesion. Loose or inadequately secured products pose a safety risk.

Note on DEKRA-Certified Products

The respective products have been tested by DEKRA under optimal conditions at speeds of up to 220 km/h. These test values apply only under ideal conditions such as dry roads, stable mounting surfaces, and calm wind conditions. Under adverse weather conditions, uneven roads, or other challenging circumstances, these values cannot be guaranteed. Therefore, regular inspection of the mounting is essential to ensure safety.

Speed Limit and Load

The maximum permissible speed according to the manufacturer's specifications must not be exceeded. Exceeding these limits can not only damage the product but also compromise road safety.
During highway driving, regular inspection of the mounting is essential, as the resulting wind and vibrations increase significantly with speed.

Safety Instructions and Warnings for Products with Integrated Batteries

Storage and Handling

Do not store the product in wet, damp, or dusty places.
Avoid placing heavy objects on the product to prevent damage.
Do not expose the product to excessive heat or store it near flammable materials.

Charging the Product

The product should only be charged using original accessories.
Ensure no foreign objects enter the connections (charging port and power plug). Foreign objects can cause fire or electric shock.

Integrated Battery

The integrated battery must not be removed or replaced independently for safety reasons.

Maintenance and Inspection

Fully charge the battery before first use and ensure the product functions properly.
Charge the battery at least every 6 months to ensure optimal performance.
Inspect the product regularly, especially with prolonged use.

Battery Storage

Batteries should only be stored within a temperature range of -20 °C to +40 °C to ensure their safety and performance.
Do not store products with batteries in vehicles, as extreme heat above +40 °C can occur in the interior during high outdoor temperatures, causing damage or hazards such as overheating or fire.
Keep the product in a cool, dry, and well-ventilated place away from direct sunlight.

Disposal

The integrated battery must not be improperly disposed of. Observe the applicable regulations for the disposal of batteries and electronic devices in your region.
Burning, disassembling, or independently removing the battery is prohibited and can cause damage or hazards.

Note: The batteries built into this product are not classified as hazardous materials when used as intended.

Raptors LED Technik®
Ruth Schwob Str. 14
D-74924 Neckarbischofsheim

Tel.: +49 (0)7263 4087078
Mail.: info@raptors-led-technik.de

Average item rating

All reviews:

Most helpful item review

1 from 1 person found this helpful.

Gutes LED Schild mit Einschränkung
Die LED sind gut hell und gut sichtbar.
Leider finde ich, dass man definitiv an dem Anschluss an die Platine gespart hat.
Die Lötpunkte werden sich bei Vibration oder leichtem Ziehen am Kabel schnell lösen.

Es hätte zumindest mehr dafür gesorgt werden können, dass das Kabel einen Abreissschutz erhält!
Das ist definitiv leider überhaupt nicht gut gelöst.

Ansonsten ein Produkt mit guter Sichtbarkeit.

Marco G , 20.12.2022

How do reviews work?

Total entries: 10

Super Ware
Super Ware , funktioniert einwandfrei. Sehr gut sichtbar. schneller Versand. Top

Thomas N , 17.11.2022 Verified purchase

Gut
Guter preis, schnelle Lieferung. Passt

Ferdi R , 04.02.2023

MEGA
Super Schild und mega hell. Für das Geld klasse!!!
Die Lötstellen sind nicht so super, aber das passt so. Das bleibt ja eh hängen.

Stan , 07.04.2023

Sehrschön
Dieses Schild macht was her. Sieht gut aus und ist auch gut zu sehen.

Frank Rommel , 16.12.2023

Preis Leistung Top
Ich habe vor kurzem dieses Einsatzschild bestellt und bin mega begeistert. Das perfekte Schild für den Straßenverkehr, das aufmerksam macht wenn man im Einsatz bei unwissenden Verkehrsteilnehmer schnell vorbei fährt. Die Montage vom Schild ging echt schnell. Die Sichtbarkeit vom Schild ist genauso gut am Tag wie bei Nacht.

Ich kann dieses Produkt nur weiterempfehlen.

Feuerwehr S. , 26.08.2024

Perfekt für den Einsatz.
Sichtbar selbst bei Nebel.
Bei Tag und bei Nacht schon oft seinen Dienst erwiesen.

Ganz einfach mit Saugknöpfen montiert, hält.
Via Stecker in den Zigarettenanzünder im Auto mit Strom versorgt und Knopf gedrückt, funktioniert perfekt.

LEDs leuchten wirklich hell genug wie ich finde.
Preis finde ich gerechtfertigt, bin ich ganz ehrlich.
Werde vielleicht bald ein 2tes für den anderen Wagen bestellen.. mal sehen.

Mo , 10.11.2024

Sehr zufrieden
Mit dem Led Schild bin ich sehr zufrieden. Ich muss echt sagen das ist genau das was ich schon immer gesucht und gebraucht habe.
Es ist sehr gut zum befestigen mit den Saugnäpfen oder alternativ kann man sich noch Klettbändern besorgen und das Schild an die Sonnenblende befestigen.
Das perfekte Schild bei einem Einsatz damit alle den Weg freimachen und mich vorbei fahren lassen.
Ich persönlich kann es nur jedem empfehlen.

J.S. , 02.01.2025

Ist definitiv weiter zu empfehlen
Tolles Produkt, tolle Preis Leistung
Artikel ist bereits mehrfach zum Einsatz gekommen
Würde ich wieder kaufen.

Anonym , 13.02.2025

Top Produkt, perfekt für den Einsatz
Das LED-Einsatzschild Slim hat helle LEDs und ein tolles schlichtes Design, was mir sehr gut gefällt.

Die Montage erfolgt mühelos mit Saugnäpfen an der Windschutzscheibe oder im Heckbereich.

Das Schild wird über einen KFZ-Stecker (im Lieferumfang enthalten) mit Strom versorgt. Über den KFZ Stecker erfolgt auch die Bedienung vom Schild. Aufgrund meiner positiven Erfahrung und der einfachen Montage und Bedienung kann ich dieses Produkt ganz klar weiterempfehlen :)

Anonym , 04.03.2025

Top Gerät
Das Schild wurde sehr schnell geliefert und macht einen hochwertigen Eindruck. Es super leicht anzubringen.

Ich bin sehr zufrieden und auch die Helligkeit ist völlig in Ordnung. Von mir gibt es fünf Sterne.

Anonym , 21.03.2025

Total entries: 10

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage