Grillstrobe SLIM - ECE R65

(19 Reviews)

SKU: 183

Available immediately

from 79,99 €

excl. 19% VAT , plus

Leuchtfarbe
Größe

PDF offer

This item has variations. Please select the requested variation.

With a height of only 1.2 cm, our SLIM grillstrobes sare ideally suited for the grill lip area on the vehicle. This can also be used as a rear warning system in the rear area. Several SLIM rillstrobes can be synchronized without any Problems.

The included two bracket options provide easy mounting for different applications and surfaces.

I Syncable
I Extremely flat design
I Use in the radiator area or in narrow places
I Power supply via 10-30V DC

Approval:
I ECE R65
I ECE R10
I Category XA1/XB1
I 1,2,4x Flash

Specifications:
I have rugged cast case
I Fastening with screws or holder
I 4-6 high-power LEDs
I Operating voltage: 10-30V DC
I Degree of protection: IP65
I Working temperature: -30°C - +60°C
I Dimensions: LxWxH 6.5/13.5cm x 2.3cm x 1.2cm

Please read the instructions carefully and adhere to the regulations and guidelines listed before operating the device.

WARNING Risk of Injury!

The optical radiation from LED products can damage your eyes.
Never look directly into the light of LED products.

General Safety Instructions - Installation

Installation, commissioning, and maintenance should only be performed by qualified electricians.
Never work on the device while it is live. Risk of fatal electric shock!
Never exceed the permissible voltage specified in this manual.
Do not remove the housing to avoid the risk of electric shock.
LED products must be installed in compliance with the electrical and mechanical safety regulations applicable in your country.
Ensure that the connection cables are laid without kinks, pinches, or sharp edges during installation.
If drilling holes into the structure of the vehicle is necessary for permanent installation, ensure that the vehicle surface is not damaged (e.g., by corrosion). Be cautious not to damage cables or load-bearing components while drilling.

General Safety Instructions - Usage

Avoid extreme temperatures or strong vibrations.
LED products may only be used within the temperature ranges specified in the manual.
Ensure LED products are only operated in accordance with their protection class (IP rating) and are not exposed to prolonged moisture or heavy rain if it falls outside the specified protection class.
Any mechanical stress or load on LED products is prohibited.
LED products must not be used in environments where the presence of flammable gases, vapors, or dust is possible.
Disconnect the LED product from the power supply when not in use or during cleaning (e.g., unplug the connector, trip the fuse, etc.).

Safety Instructions for Magnetic Mounts

Magnetic mounts generate strong forces that can cause injuries if mishandled. Be especially careful to avoid pinching fingers or hands.
Keep magnets away from sensitive devices and objects, such as electronic devices (e.g., smartphones, laptops), magnetic storage media (e.g., credit cards, hard drives), and watches. Such items can be damaged or rendered unusable by magnetic fields.
Store magnets safely when not in use and away from sensitive materials to prevent accidental damage. Preferably keep them in their original packaging.

Special Instructions for Individuals with Medical Implants

Warning: Individuals with pacemakers, implanted defibrillators, or other medical implants must avoid close proximity to strong magnetic fields.

Magnets can significantly disrupt or deactivate such devices, leading to life-threatening situations.
Users with medical implants are strictly prohibited from handling products or accessories with magnetic mounts to ensure their safety.
Maintain a safe distance from magnetic fields, even if the magnets are packaged or not actively in use.

Target Audience

The use and operation of the LED product are permitted only by trained and instructed personnel.
Children must be kept away from LED products. Children and individuals with limited physical, sensory, or cognitive abilities, or lack of experience and knowledge, may only use LED products under supervision.

Cleaning and Maintenance

Perform a thorough visual inspection of the device for cracks, discoloration, damage, contamination, and the condition of seals before each use and at regular intervals. Ensure that glass and seals are properly positioned and fully tightened to prevent water ingress.
Regularly check that all screws and fittings are tightened, especially after vibrations or shocks, to ensure secure mounting.
Improper cleaning of the LED product can cause damage. Do not use aggressive cleaning agents, brushes with metal or hard bristles, or sharp or metallic cleaning tools. During vehicle washes, avoid applying high pressure directly to the installed LED products.

Driving with Mounted Products (Permanently Installed or Magnetic Mounts)

Aerodynamic Effects

The installation of additional products, regardless of the mounting type, affects the vehicle's aerodynamics. This can increase air resistance and impact driving stability, especially at higher speeds.
Adjust your speed according to the changed driving conditions and wind load to ensure safe driving behavior.

Adaptation to Weather Conditions

In adverse weather conditions such as strong winds, rain, snow, or ice, reduce your speed to prevent the mounted products from lifting or detaching.
Note that wind and pressure on the products during rain or snowfall may be stronger and can impact adhesion or stability. Regularly check the mounting.

Secure Hold with Magnetic Mounts

Magnetic mounts can be affected by vibrations, strong wind loads, or uneven roads. Check the secure fit of the magnetic mount before starting your journey and regularly during long trips.
Ensure that the mounting surface is clean and free of grease to ensure optimal adhesion. Loose or inadequately secured products pose a safety risk.

Note on DEKRA-Certified Products

The respective products have been tested by DEKRA under optimal conditions at speeds of up to 220 km/h. These test values apply only under ideal conditions such as dry roads, stable mounting surfaces, and calm wind conditions. Under adverse weather conditions, uneven roads, or other challenging circumstances, these values cannot be guaranteed. Therefore, regular inspection of the mounting is essential to ensure safety.

Speed Limit and Load

The maximum permissible speed according to the manufacturer's specifications must not be exceeded. Exceeding these limits can not only damage the product but also compromise road safety.
During highway driving, regular inspection of the mounting is essential, as the resulting wind and vibrations increase significantly with speed.

Safety Instructions and Warnings for Products with Integrated Batteries

Storage and Handling

Do not store the product in wet, damp, or dusty places.
Avoid placing heavy objects on the product to prevent damage.
Do not expose the product to excessive heat or store it near flammable materials.

Charging the Product

The product should only be charged using original accessories.
Ensure no foreign objects enter the connections (charging port and power plug). Foreign objects can cause fire or electric shock.

Integrated Battery

The integrated battery must not be removed or replaced independently for safety reasons.

Maintenance and Inspection

Fully charge the battery before first use and ensure the product functions properly.
Charge the battery at least every 6 months to ensure optimal performance.
Inspect the product regularly, especially with prolonged use.

Battery Storage

Batteries should only be stored within a temperature range of -20 °C to +40 °C to ensure their safety and performance.
Do not store products with batteries in vehicles, as extreme heat above +40 °C can occur in the interior during high outdoor temperatures, causing damage or hazards such as overheating or fire.
Keep the product in a cool, dry, and well-ventilated place away from direct sunlight.

Disposal

The integrated battery must not be improperly disposed of. Observe the applicable regulations for the disposal of batteries and electronic devices in your region.
Burning, disassembling, or independently removing the battery is prohibited and can cause damage or hazards.

Note: The batteries built into this product are not classified as hazardous materials when used as intended.

Raptors LED Technik®
Ruth Schwob Str. 14
D-74924 Neckarbischofsheim

Tel.: +49 (0)7263 4087078
Mail.: info@raptors-led-technik.de

Average item rating

All reviews:

How do reviews work?

Entries 1 – 10 of 19

Sehr hell
Super Produkt!

Sehr hell und hochwertig verarbeitet. Ähnlich wie die von Standby.

Notarzt 0815 , 15.05.2023

TOP
Tolles Produkt! Super Preis und mega hell

Werner A , 17.05.2023

Klasse Artikel
Super hell und kräftige Farbe

45GGR , 19.05.2023

Sehr zufreiden
Ich bin sehr zufrieden! Toller Service und freundlicher Ansprechpartner.

Die Artikel machen einen hochwertigen Eindruck!

Franzl , 11.06.2023

Volle Kaufempfehlung
Super Verarbeitung und super Service!
Qualität ist top!
Helligkeit ist auch sehr gut ! Versand erfolgte blitzschnell. Das Produkt ist gut und sicher Verpackt.
Kann man nur weiter empfehlen

Anonym , 25.07.2023

Hohe Leuchtkraft und gute Verarbeitung
Super Verarbeitung und super Service.
Helligkeit ist auch sehr gut.
Das Produkt ist gut und sicher Verpackt.
Der Frontblitzer ist schnell montiert und einsatzbereit.
Ich würde es auf jeden Fall wieder kaufen und empfehle es gerne jedem weiter.
Wirklich ein Klasse Produkt.

Anonym , 21.08.2023

Sehr schöner Artikel
Der Artikel wurde schnell geliefert und ist wirklich sehr hochwertig verarbeitet. Hier ist kein Material dabei was in der Zukunft Probleme bereiten könnte. Die Leuchtkraft ist wirklich enorm und die Farbausbeute ebenfalls. Für uns gibt es fünf Sterne für dieses tolle Produkt

Feuerwehr Be. , 26.08.2023

Sehr hochwertig!
Wir hatten zuvor die Blitzer von LED Martin, diese wurden leider feucht und waren auch von der Verarbeitung nicht perfekt!
Die SLIM sind wirklich super, Sie sind dicht und die Farbausbeute ist sehr kräftig!

Belibub , 01.11.2023

Top Frontblitzer
Ich habe 2 Frontblitzer Slim gekauft. Ich bin sehr zufrieden und kann dieses Produkt nur weiterempfehlen.
Meine Bewertung:
Die Lieferung erfolgte schnell innerhalb von 3 Werktagen mit DHL
Die Verkäufer Reaktion erfolgte sehr schnell auf Nachfrage meinerseits (binnen 15min)
Lieferumfang:
- Frontblitzer
- Kurzanleitung mit Schaltungshinweisen (Als Pdf zum Download auf der Homepage Produktseite)
- Die im Lieferumfang enthaltenen zwei Halteoptionen bieten eine einfache Montage bei verschiedenen Anwendungen und Oberflächen.

Frontblitzer:
- Verarbeitung im ganzen hochwertig und Bauform unauffällig gehalten
- Firmenlogo sind mittels Lasergravur auf dem Gehäuse aufgebracht
- Leuchtstärke der Blitzer erscheint subjektiv durchweg positiv und kräftig, selbst an einem sonnigen Tag
- Perfekt für den Grilllippenbereich oder Heckbereich am Fahrzeug geeignet

Fazit: Bei den Frontblitzer Slim handelt es sich zweifelsfrei um eine leistungsstarke und einfach in Betrieb zu nehmende Lösung mit breitem Einsatzspektrum. Ich kann es jedem für den gewerblichen wie auch für den privaten Gebrauch empfehlen.

Felix H. , 07.11.2023

Spitzen Preis-/Leistungsverhältnis!
Ich habe 2 Frontblitzer Slim gekauft. Die Montage ist ziemlich einfach und fast selbsterklärend. Nach kurzer Verkabelung und Montage waren die Blitzer einsatzbereit. Die Blitzmuster lassen sich verstellen, die Blitzer sind syncronisierbar. Das Licht ist schön gelb und geht nicht ins weiße über. Auch die Lichtintensität ist super, sowohl am Tag als auch mit der Nachtabsenkung. Durch die flache Bauweise und die passende Halterung eignen sie sich perfekt für die Montage am Kühlergrill, egal ob über oder unterhalb, da die Halterung für beides geeignet ist. Mit den Schaumstoffdichtungen werden Vibrationen minimiert und schützt die Blitzer zusätzlich. Mit den mitgelieferten Schrauben lassen sich die Halterung entweder direkt in den Grill schrauben, alternativ sind auch Schrauben mit Muttern zum Gegenschrauben in z.B vorgebohrte Löcher dabei. Die Anleitung findet man online auf der Website des Herstellers. Alles in allem ein gutes Preis-/ Leistungsverhältnis - klare Weiterempfehlung

Günter B. , 10.11.2023

Entries 1 – 10 of 19

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage